RIEGL to Exhibit and Present at ILMF 2018!

Press Release

For Immediate Release

Orlando, Florida, January 30, 2018 

 

ILMF Banner

 

RIEGL will be exhibiting and presenting at the International LiDAR Mapping Forum (ILMF) 2018!

ILMF 2018 will be held at the Hyatt Regency Denver in Denver, Colorado. from February 5-7, 2018.

RIEGL will be exhibiting at Booth 315 during the conference. Be sure to stop by our booth to learn about the latest developments in RIEGL Waveform-LiDAR technology and how they can help you and your business!

Stop by our booth to see some of our instruments on display: the NEW VQ-780i, the VQ-1560i, the VP-1, the NEW VMX-2HA, the miniVUX-1UAV, the NEW miniVUX-1DL, and the NEW Integration Kit 600 for the miniVUX.

The NEW RIEGL VQ-780i is a high performance, rugged, lightweight, and compact airborne mapping senor. This versatile system is designed for high efficient data acquisition at low, mid, and high altitudes, covering a variety of different airborne laser scanning applications from high density to ultra wide area mapping.

The RIEGL VQ-1560i is a dual channel waveform processing airborne LiDAR mapping system that is an ultra high performance, fully integrated and calibrated system that is well prepared for fulfilling the challenging demands of even complex airborne mapping missions.

The RIEGL VP-1 is our helicopter pod for airborne laser scanning. Our VUX-SYS fits the small and lightweight helicopter pod that can be mounted on standard hard points and typical camera mounts of manned helicopters with quick system installation and removal.

The NEW RIEGL VMX-2HA is a high speed, high performance dual scanner mobile mapping system which provides dense, accurate, and feature-rich data at highway speeds. With 2 million measurements and 500 scan lines per second, this turnkey solution is ideally suited for survey-grade mobile mapping applications.

Joshua France, Mobile Segment/Support Manager with RIEGL USA, will be showcasing the NEW RIEGL VMX-2HA on Tuesday, February 6 at 10:10 AM at the RIEGL booth, Booth #315. Be sure to make it to the booth to check it out for yourself!

The RIEGL miniVUX-1UAV miniaturized LiDAR sensor is a user-friendly and cost-efficient device used to acquire survey-grade measurement data by use of remotely piloted multi-rotor, rotary-wing, or fixed-wing UAV’s for a variety of applications.

The NEW RIEGL miniVUX-1DL “Downward-Looking” LiDAR sensor for unmanned laser scanning is a sister device to the miniVUX-1UAV

The NEW RIEGL Integration Kit 600 can be utilized on nearly any UAV (optimized for the DJI M600 Pro) for the RIEGL miniVUX-SYS configured with either the NEW RIEGL miniVUX-1DL or the RIEGL miniVUX-1UAV, integrated with either the Applanix APX-15 or APX-20 INS/GNSS systems. No previous experience is necessary to assemble the kit: instructions are written in an easy-to-follow, step-by-step guide, all tools are included, and it takes less than 60 minutes to completely install the kit!

Come by the booth to see these instruments in person and discuss your business needs and how our LiDAR solutions can help you with our team of RIEGL experts.

In addition to our exhibition, we will also be presenting during ILMF 2018!

Dr. Andreas Ullrich, CTO of RIEGL Laser Measurement Systems GmbH, will be participating in the panel discussion “Geiger Mode, Single Photon vs Linear Scanning” on Tuesday, February 6 from 9:30-10:00 AM in Room Centennial F-H.

Dr. Andreas Ullrich will also be presenting “Pre-Processing of Dense but Noisy LiDAR Point Clouds: Impact on Information Extraction in High-Precision LiDAR Surveying” in the LiDAR Data Processing session on Wednesday, February 7 from 8:55-9:20 AM in Room Centennial A-C.

We will also be hosting a product preview during ILMF 2018.

Vladimir Kadatskiy, Airborne Systems Segment Manager with RIEGL USA, will be hosting a product preview on the RIEGL VQ-780i on Monday, February 5 from 11:15-11:30 AM in Track 1 in Room Centennial A-C. Be sure to stop by to learn more about this fantastic system!

RIEGL is looking forward to a successful conference and to welcoming you to ILMF 2018!

 

About RIEGL:

RIEGL is an international leading provider of cutting edge technology in airborne, mobile, terrestrial, industrial and unmanned laser scanning solutions.

RIEGL has been producing LiDAR systems commercially for almost 40 years and focuses on pulsed time-of-flight laser radar technology in multiple wavelengths.

RIEGL’s core Smart-Waveform technologies provide pure digital LiDAR signal processing, unique methodologies for resolving range ambiguities, multiple targets per laser shots, optimum distribution of measurements, calibrated amplitudes and reflectance estimates, as well as the seamless integration and calibration of systems.

RIEGL’s various 3D scanners offer a wide array of performance characteristics and serve as a platform for continuing ”Innovation in 3D” for the LiDAR industry.

From the first inquiry, to purchase and integration of the system, as well as training and support, RIEGL maintains an out-standing history of reliability and support to their customers.

Worldwide sales, training, support and services are delivered from RIEGL’s headquarters in Austria, main offices in the USA, Japan, and China, and by a worldwide network of representatives covering Europe, North and South America, Asia, Australia, and Africa.

 

For More Information:

Jillian Kreider, Communications Specialist

RIEGL USA                                                                                                    

7035 Grand National Drive

Orlando, FL 32819

Phone:  (407) 248-9927

Fax:  (407) 248-2636

jkreider@rieglusa.com ; info@rieglusa.com

Leave a Reply!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s